动词 mar disfigure blemish spoil distort

及物动词 embellish beautify

1. Heat deforms plastics.
    热使塑料变形。

2. Her face was deformed by anger.
    她气得脸都变形了。

1. 变形：第一节 档案(File)菜单第二节 编辑(Edit)菜单第三节 检视(View)菜单第四节 选取(Pick)菜单第五节 复制(Copy)菜单第六节 变形(Deform)菜单第七节 曲线(Curve)菜单第八节 曲面(Surface)荣单第九节 杂项(Misc)荣单第十节 帮助(He

2. 软件：环境定性的分析切削热,并利用通用有限元软件(DEFORM)举行建模分析,给出一种直不雅的温度场漫衍状况. 最后接纳纯一变量法,求出切削温度关于转速、进给量的瓜葛式,应用Matlab编程,作出前刀面最高切削温度与转速、进给量的变化曲线.

3. 使不成形,使丑：deflect 使偏斜,使转向 | deform 使不成形,使丑 | defraud 欺骗,诈欺

4. (使)变形：deflect#使偏离 | deform#使变形 | defraud#欺诈

1. But keep them out of areas that deform a lot, and/or need to be smooth.
    但是，他们的领域保持指出，变形了很多，和/或需要平稳。

2. danci.911cha.com

2. This paper presents the method of curve deform which is based on the concept of the energy of deform curve.
    本文提出了基于变形曲线能量的概念，进行曲线相似变形的方法。

3. deform

3. No material will not deform under the action of force.
    没有一种材料在力的作用下不变形的。

4. One hundred scores were obtained according to pain of knee, function of walking, joint range of motion, muscle strenght, deform of genuflex and stability.
    将膝关节按疼痛、行走功能、关节活动度、肌力、屈膝畸形、稳定性，共计100分，并设定了若干减分项目。

5. The effect of the wormlike micelles flooding (w/%, 1.83 NaOA+4.24 Na2CO3) is 25% OOIP for thick oil in east area of Gudao oilfield after polymer injection flooding. Tablet coarse microscopic simulation flooding experiment showed that the bound residual oil after polymer flooding can restart, deform and form oil bank through capillary throat and moves to exit when wormlike micelles system is added into the model. It showed that wormlike micelles system can improve flooding efficiency notably by enlarging swept volume and advancing washing oil efficiency. The wormlike micelle flooding can effectively enlarge the covered volume and the flushing efficiency, thereby upgrades the flooding efficiency.
    结果表明，在油酸钠溶液中，加入一定量的 Na2CO3能够形成蠕虫状胶束；孤岛东区稠油注聚驱后，蠕虫状胶束驱油配方（ w/%，1.83 NaOA+4.24 Na2CO3）的室内模拟驱油可提高采收率25%原始石油地质储量；平板夹砂微观驱油模型显示蠕虫状胶束驱油体系进入模型中，能够使注聚后束缚残余油重新启动、变形，渐渐形成油墙向出口处运移，蠕虫状胶束驱油体系能够有效扩大波及体积，提高洗油效率，从而提高驱油效率。

6. /u0064/u0061/u006E/u0063/u0069/u002E/u0039/u0031/u0031/u0063/u0068/u0061/u002E/u0063/u006F/u006D

6. It is then heated and subjected to isostatic pressure sufficient to plastically deform both the container and the powder.
    再加热并施加均衡压力足以使容器和粉末都塑性变形。

7. deform的反义词

7. The influences of interface friction and deformation speed on the forming load and billet damage were studied in this paper.
    利用有限元软件Deform-2D，对奥氏体不锈钢变薄拉深过程进行热力耦合的数值模拟，研究了凸、凹模与坯料间摩擦和变形速度对变薄拉深过程的成形载荷和坯料损伤的影响。

8. deform是什么意思

8. The statuses of strain and stress, metal flow rule have been gotten based on the three-dimensional simulation software DEFORM-3D by the use of rigid plasticity finite element analysis. The deformation process, equivalent stresses, equivalent strains are showed by figure and curve. And the deformation rulers have been gotten. Invalidation form of straight tooth bevel gear of rotary roll cavity die has been analyzed, and the finite element simulation method is employed to change the processing parameter of rotary roll.
    结合齿轮成形规律，参照直齿圆锥齿轮摆辗成形生产经验，通过改变直齿圆锥齿轮摆动辗压的工艺参数的有限元模拟，分析探讨了下模进给量、摩擦系数和摆头倾角的改变量对凹模应力影响程度以及对凹模失效形式的影响分析，获得了模具在不同工艺参数下的应力对比曲线，直观而又深刻地揭示了摆动辗压工艺参数对模具的具体影响程度。

9. The exterior layers deform at the point of impact and become finely granulated, thereby absorbing the energy.
    它的外观层变形的撞击点，成为细颗粒，从而吸收的能量。

10. deform

10. A steady increase of load on a part will cause it to deform gradually.
    不断的增加零件的负荷会使零件逐渐变形。

11. With respect of slab lateral cambering of hot rolling sizing press, the analysis shows it is the temperature difference on both sides of the slab that causes different resistance in metal's plastic deformation, which makes metal deform at different speeds.
      针对热轧SP定宽轧制的板形侧弯问题，经分析指出：板坯两侧温差造成金属塑性变形抗力大小不相等，从而使金属变形速度不同，变形速度快则相同时间内移动的金属量多，最终使变形快的一侧向变形慢的一侧弯曲是板形侧弯的形成机理。

12. Based on this, using DEFORM3D software, the tube forming processes at different extrusion velocity were simulated.
      在此基础上，采用DEFORM3D软件，对不同挤压速度的成形过程进行了模拟，发现挤压速度为0。

13. By means of prototype observation, analysis with materials and theories, and laboratory test, the author deeply analyzed the causes and procedure of canal cross section erosion, and obtained eight causes which resulted the canal deform including flow, seepage, runoff, collapse of bank, dry effect, human activity, wave flush, frozen, and then stressed to discuss the frozen process.
      本文通过原型观测、资料分析、理论分析、室内试验对北引渠道变形的成因和发生机理进行了较为深入的分析研究，给出了造成北引渠道变形的八大原因：流水引起的变形、渗透引起的冲刷、地表径流引起的冲刷、滑坡变形、干燥作用、人类和动物活动的影响、风浪引起的冲刷、冻融侵蚀，并着重阐述了冻融侵蚀的机理。

14. When connection come into the phase of larger deformations, axial force turn into the tensile force, prevent the further deform, it means that catenaries action occur.
      进入大变形阶段后，连接轴向约束压力变为约束拉力，轴向拉力阻止钢梁自身进一步变形，发生了悬链线效应。

15. Operation is conveniently and quickly, and die cutting plate will not deform.
      采用连杆机构垂直提拔，方便迅速，模板不变形。

16. Experiment results indicated that the foaming flowability of polymeric MDI was almost independent of 2, 4'-MDI content in both CFC and cyclopentane foaming systems, but increase in 2, 4'-MDI content resulted in linear rise of demoulding deform...
      实验结果表明，当聚合MDI与 2种组合聚醚进行发泡时，2 ，4` MDI含量对聚合MDI的发泡流动性影响较小，而对后熟化性能的影响明显，随 2 ，4` MDI含量的增加，脱模变形呈直线上升的趋势。

17. deform在线翻译

17. Since the thin glass has poor rigidity and it is easy to deform in lapping, this paper puts forward a new method to reduce deformation.
      针对薄板玻璃的刚度差，在研磨中容易产生变形这一特点，提出了一种新的加工方法。

18. In use of the method of functional reparation for cleft lip with mini-approach can decrease scar on skin, hence decrease the contraction deform, as well as nice reconstruction of labial arch, philtrum column and nasal wing.
      应用口内入路功能性唇裂及鼻畸形修复术具有手术后瘢痕轻微，减少术后瘢痕挛缩畸形的优点，结合口内切口入路可同期完成传统入路的各项操作要求，是治疗I度裂或隐裂较为理想的方法。

19. In order to enhance production efficiency, and ensure the symmetry and vertical degree of part, according to the features of part shape, the deep drawing and reverse redrawing warm forming process of four-one plate medium used for the part was introduced, and the forming process was simulated by the DEFORM-3D software.
      为提高生产效率，保证零件的对称性及垂直度要求，根据零件的形状特点采用4件合1中厚板正、反拉深工艺对该波导件进行温成形，并用DEFORM-3D软件对成形过程进行模拟。

20. This paper presents an approach to deform meshes based on automatic generation of control lattice.
      鉴于以上情况，本文研究并提出了一种基于控制晶格自动生成的自由变形方法。

1. （使）变形;（使）成畸形;损毁…的外形
    If something deforms a person's body or something else, it causes it to have an unnatural shape. In technical English, you can also say that the second thing deforms.

deform在线翻译

    e.g. Bad rheumatoid arthritis deforms limbs...
           严重的类风湿性关节炎会造成四肢变形。
    e.g. ...the ability of a metal to deform to a new shape without cracking.
           金属重新塑形而不断裂的能力

1. assume a different shape or form

    Synonym: change shape change form

2. alter the shape of (something) by stress

    e.g. His body was deformed by leprosy

    Synonym: distort strain

3. become misshapen

    e.g. The sidewalk deformed during the earthquake

4. cause (a plastic object) to assume a crooked or angular form

    e.g. bend the rod
           twist the dough into a braid
           the strong man could turn an iron bar

    Synonym: flex bend twist turn

5. twist and press out of shape

    Synonym: contort distort wring

6. make formless

    e.g. the heat deformed the plastic sculpture